Mts Series 651 Environmental Chambers Manuel d'utilisateur télécharger pdf (Page 17)

Series 651 Environmental Chamber

Installation

Environmental chambers are installed in load units using a mobile cart designed

for the chamber. The chamber is installed from the rear of the load unit.

Most of the environmental chambers have U-plugs. Removable sections (U-

plugs) in the top and bottom walls of the chamber allow the cart-mounted

chamber to be placed in position around the specimen and grips. Each U-plug

consists of two pieces, one stationary and the other removable. The front piece is

removed to install the environmental chamber after the specimen and all of its

instrumentation are installed in the load unit. When the specimen is ready to be

tested, the U-plugs are replaced.

Note The Model 651.05-02 and Model 651.04-01 Environmental Chambers

have no U-plugs. These units must be installed before the grips and

specimen are installed.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 29 30

Pas de commentaire

Mts Series 651 Environmental Chambers Manuel d'utilisateur Page 17