Mts Multipurpose Elite Manuel d'utilisateur télécharger pdf (Page 47)

ValueProperty

TimeTiming Type

2 secTime

RampRamp Shape

No CompensatorCompensator

AxialChannel List

DisplacementControl Mode

0 mmAbsolute End Level

5.2.7.0 Adding a Signal Scope Monitor

In this task, you add a Signal Scope to the test.The Signal Scope is graphical, real-time display of your test

data. When running the test, the Signal Scope simulates a conventional oscilloscope. The MPE application

requires defining at least one monitor display before you can run the test.

1. Click the Test-Run Display tab.

2. In the Toolbox panel, note the various monitor displays available.

3. From the Signal list, drag the Signal Scope icon to the Designer area. Position the display graph as desired.

4. Observe the Error icons on the Signal Scope, in the Properties panel, and in the Error list at the bottom

of the screen (you may need to expand the panel).The errors direct you to define a parameter for the Y

axis of the Signal Scope.

5. If necessary, click to expand the Traces panel. Then click the (...) icon next to the Y Signal property.

Selecting a Y Signal

6. Select Axial Displacement and click OK.

Multipurpose Elite Test Design Guide 47

5.0 Creating Tests

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 111 112

Pas de commentaire

Mts Multipurpose Elite Manuel d'utilisateur Page 47