Mts Criterion 60 - Lifting and Moving Instructions Manuel d'utilisateur télécharger pdf (Page 5)

Moving the Load Fame

MTS Criterion™ Series 60 Lifiting and Moving Instructions

Moving the Load Fame

Unloading

The customer will be responsible for all the unloading process if no Unloading

Service is purchased. In case of special agreement, an MTS field service engineer

can monitor the unloading, storage, and transportation process.

To unload the load frame:

1. Unload the load frame with reference to the lifting position marker

and the gravity center marker .

2. Choose suitable slings according to the weight table.

3. Lift the crate with suitable slings as shown in the following figure.

4. Pay attention to the gravity center marker on the crate to ensure stable

and balanced lifting.

Note If the machine will not be installed right away, store it in a steady, dry and

corrosion free place. MTS is not responsible for damages caused by

improper storage.

1 2 3 4 5 6 7 8 9 10 ... 14 15

Pas de commentaire

Mts Criterion 60 - Lifting and Moving Instructions Manuel d'utilisateur Page 5