Mts SWIFT 30 Sensor Manuel d'utilisateur télécharger pdf (Page 57)

Shunt Error Status

SWIFT 30 Sensors Software Utilities

Shunt Error Status

This is the error status for each bridge from the last shunt cal that was performed.

The error status is a bit-mapped status word, where the error is present if the bit is

set to 1.

Bit 0 = Bridge amplifier was saturated prior to applying the shunt.

Bit 1 = Bridge amplifier was saturated after applying the shunt.

Bit 2 = Measured delta value failed high.

Bit 3 = Measured delta value failed low.

Bit 4 = A procedural error occurred (unable to read a value, etc.).

In the following example the error status received is 5 indicating that bits 0 and 2

were set.

Bit 4 3210

Bit Value168421

Example00101

Error Status=

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 171 172

Pas de commentaire

Mts SWIFT 30 Sensor Manuel d'utilisateur Page 57