Mts Fatigue Template Manuel d'utilisateur Page 33
- Page / 122
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
The Strain Full Scale window appears.
6. You may want to set this value to 0.1 and click OK.
The Extensometer Verification Prompt window appears.
7. Click to repeat the extensometer verification or click No to continue.
5.2.6.0 Modulus Check at Start Temperature
You should perform a modulus check before you run a test. The standard template allows you to check the
modulus at start temperature and test temperature (for elevated temperature tests). The start temperature
modulus check helps determine if the system is set up correctly. For example, if you have not pulled the zero
pin from your extensometer, the modulus is incorrect. If you type incorrect specimen dimensions, the modulus
is incorrect.
5.3.0 Run the Test
5.3.1.0 Measure Modulus
To check the modulus in the LCFS test:
1. Click Measure Modulus.
The MTS TestSuite Input Parameters window prompts you to enter a load value to ramp to for a modulus
check.
2. Enter a load value and click OK.
3. Click the Run button.
4. A window appears with the Modulus Check Result.
• Click Accept to accept the result.
• Click Reject to discard the result.
• Click Measure Modulus to perform the modulus check again.
• Click View Data Report to see the results in report form.
5.3.2.0 Strain-Controlled Test
A typical low-cycle fatigue (LCF) test sequence includes:
1. Ramp to mean level, if the mean level at the start of the test is not zero. All data recorded during the ramp
is stored in cycle number 0 (zero).
2. Identify a stable cycle for comparison with other test values.
3. Start the test cycle count, start test data collection, and run the test to completion.
4. Ramp the system to the mean load of the last cycle.
MTS TestSuite 33
5.0 ASTM Low-Cycle Fatigue (LCF) Strain Template
- MTS TestSuite 1
- Contents 3
- 1.0 Technical Support 9
- 2.0 Preface 13
- Hypertext links 15
- MTS TestSuite 15 15
- 3.0 Overview 17
- 3.1.0 Template Overview 18
- 3.1.2.0 Fatigue Templates 19
- 3.2.1.0 Importing Legacy Data 21
- 4.0 Test Setup 23
- 4.3.0 Enable Manual Control 24
- 4.4.0 Install Specimen 25
- 4.5.0 Disable Manual Control 26
- Strain Template 27
- 5.1.0 Set Up the Test 28
- 5.2.0 Define Test Parameters 30
- 5.3.0 Run the Test 33
- 5.3.3.0 Strain Test 34
- 5.4.0 View Test Results 35
- 5.5.0 Analyze Data 36
- 5.5.2.0 Analyze the Test Runs 38
- 6.1.0 Set Up the Test 40
- 6.2.0 Define Test Parameters 42
- 6.3.0 Run the Test 45
- 6.3.9.0 Strain Test 48
- 6.4.0 View Test Results 49
- 6.5.0 Analyze Data 49
- 6.5.2.0 Analyze the Test Runs 52
- Load Test Template 53
- 7.1.0 Set Up the Test 54
- 7.2.0 Run the Test 56
- 7.2.7.0 Measure Modulus 59
- 7.3.0 View Test Results 60
- 7.4.0 Analyze Data 61
- 7.4.2.0 Analyze the Test Runs 62
- 8.0 Transition Test Template 65
- 8.1.0 Set Up the Test 66
- 8.2.0 Run the Test 68
- 8.2.5.0 Transition Parameters 70
- 8.2.6.0 Load Test Parameters 70
- 8.2.10.0 Measure Modulus 72
- 8.2.11.0 Strain Test 72
- 8.3.0 View Test Results 73
- 8.4.0 Analyze Data 74
- 8.4.2.0 Analyze the Test Runs 76
- 9.0 Transition Test Elevated 77
- Temperature Template 77
- 9.1.0 Set Up the Test 78
- 9.2.0 Run the Test 80
- 9.2.4.0 Transition Parameters 81
- 9.2.5.0 Load Test Parameters 82
- 9.2.6.0 Load Test 82
- 9.2.12.0 Measure Modulus 84
- 9.2.16.0 Strain Test 85
- 9.2.18.0 Load Test 86
- 9.3.0 View Test Results 87
- 9.4.0 Analyze Data 87
- 9.4.2.0 Analyze the Test Runs 90
- 10.0 ASTM Trapezoidal Strain 91
- Template 91
- 10.1.0 Set Up the Test 92
- 10.2.0 Run the Test 94
- 10.2.7.0 Measure Modulus 97
- 10.2.9.0 Strain Test 98
- 10.3.0 View Test Results 99
- 10.4.0 Analyze Data 100
- 11.0 ASTM Trapezoidal Strain 103
- Elevated Temperature Template 103
- 11.1.0 Set Up the Test 104
- 11.2.0 Run the Test 106
- 11.2.8.0 Measure Modulus 109
- 11.2.15.0 Strain Test 113
- 11.4.0 Analyze Data 114
- 11.3.0 View Test Results 114
- MTS TestSuite 119 119
- 120 MTS TestSuite 120
- 100-256-292 D 121
Produits connexes et manuels pour Matériel Mts Fatigue Template
Matériel Mts TW Elite Manuel d'utilisateur
(132 pages)
(132 pages)
© 2020, manymanuals.fr. Tous droits réservés | 0.568 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels