Mts SWIFT 10 MC Sensor Manuel d'utilisateur télécharger pdf (Page 80)

SWIFT 10 MC Sensors

Road and Track Vehicles

Installing the Transducer

Driving a vehicle with SWIFT sensors mounted on it will change the

handling characteristics of the vehicle.

Driving a vehicle configured in this way on public roads can pose

unexpected dangers to pedestrians and other vehicle traffic.

Only authorized, licensed drivers, who are experienced driving a vehicle with

SWIFT sensors mounted on it, should be allowed to operate the vehicle on public

roads. Drive the vehicle with the SWIFT sensor attached on closed courses only

until you have proper experience.

When driving the vehicle on public roads, you must conform to all local laws and

regulations.

Do not use the SWIFT sensor if it has been exposed to load cycles that

exceed the full scale calibrated ranges listed on the calibration sheets

provided with each transducer.

Excessive loading or load cycles could cause a fracture of the transducer,

wheel rim, hub adapter, or fasteners and can result in serious injury, death

or property damage.

Always be aware of the maximum full scale loads appropriate for your transducer.

If the prescribed limit for any axis of the transducer has been exceeded, contact

MTS for an evaluation and, if necessary, arrange for the return of the transducer,

with the recorded load cycles, to MTS for physical inspection and analysis of the

load cycle history.

WARNING

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 143 144

Pas de commentaire

Mts SWIFT 10 MC Sensor Manuel d'utilisateur Page 80