Mts SWIFT 45 GLP Sensor Manuel d'utilisateur télécharger pdf (Page 40)

SWIFT

45 GLP Sensors

Road and Track Vehicles

Installation

C. Repeat Step 6A for the final torque.

7. Tighten the M20 mounting bolts.

A. Following the sequence shown in the previous figure, torque the eight

M20 bolts (1 through 8) to the value for the first increment shown in

the following table.

B. Repeat Step 7A for the second increment.

C. Repeat Step 7A for the final torque.

8. Refer to Step 4. Finish tightening the 32 hub adapter bolts.

A. Following the sequence shown in the previous figure, torque the 32

M12 bolts (1 through 32) to the value for the first increment shown in

the following table.

B. Repeat Step 8A for the second increment.

C. Repeat Step 8A for the final torque.

Note To minimize negative clamping effects, you must torque the bolts in the

sequence shown.

BOLT SIZE

TORQUE INCREMENT M12 M20

1st Increment 32.5 N·m (24 lbf·ft) 168.1 N·m (124 lbf·ft)

2nd Increment 65 N·m (48 lbf·ft) 336.2 N·m (248 lbf·ft)

Final Torque 97.6 N·m (72 lbf·ft) 501.6 N·m (370 lbf·ft)

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 105 106

Pas de commentaire

Mts SWIFT 45 GLP Sensor Manuel d'utilisateur Page 40