Mts SWIFT 45 GLP Sensor Manuel d'utilisateur télécharger pdf (Page 47)

Road and Track Vehicles

SWIFT

45 GLP Sensors

Installation

Note Use care when installing the slip-ring bracket. The circular connectors

are keyed. The slip-ring bracket should be fitted on straight (without

bending or angling it) to make sure it engages both connectors

simultaneously and evenly.

F. Lubricate the threads and under the bolt heads of the eight

M5 X 0.8 mm bolts with Molykote g-n paste. Insert them through the

mounting holes in the slip-ring bracket and thread them into the

transducer. Torque them to 6.8 N·m (5 lbf·ft).

8. Secure the cable along the restraint tube, as necessary, to prevent it from

rubbing against the tire.

9. Secure the cable along the remainder of its length so that it will not become

damaged during data collection. (For example, tape it to the fender or

frame.)

Important Be sure to leave enough slack in the cable to allow for the full

range of wheel travel so the cable does not become stretched or

damaged during testing.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 105 106

Pas de commentaire

Mts SWIFT 45 GLP Sensor Manuel d'utilisateur Page 47